1 za connector 1.5mm pitch/board-in insulation displacement connectors d j s d v j u t u p d j s d v j u t ? n j o n j o ? this newly designed insulation displacement board-in connector features twin slots provided at the insulation displacement section. this is the most important section of the insulation displacement connector contact, and has an insulation barrel located between the twin slots. the insulation barrel firmly grips and secures the wire during insulation displacement connection to protect the insulation displacement section from possible damage. due to significant increases in connection reliability, insulation displacement connection has become possible with this 1.5mm pitch board-in connector. ? compact, direct mounting 1.5mm pitch insulation displacement board-in connector ?twin-slot insulation displacement section ?insulation barrel construction ?3-point grip construction specifications ?current rating: 0.7a ac, dc (awg #28) ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?insulation resistance: 500m min. ?withstanding voltage: 500v ac/minute ?applicable wire: ul1571 (contact jst for details regarding other ul styles.) awg #30, #28 (contact jst if awg #30 wire is to be used.) conductor/7 strands, tin-coated insulation o.d./0.7 to 0.8mm ( contact jst for diameters greater than 0.8mm ) ?applicable pc board thickness: 0.6 to 1.2mm * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 pc board layout (viewed from soldering side) and assembly layout note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. 3. pulling or otherwise putting a strain on the harness attached to the connector before the solder has completely cooled can dislodge the connector or cause its misalignment. 4. do not reuse connectors that were previously soldered and then removed from a pc board.
za connector 2 2 + 4 5 " # circuits model no. dimensions (mm) " # material and finish awg #30(natural/gray) awg #28(green) q'ty / box contact: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) housing: glass-filled pa 66, ul94v-0 02za-3h 03za-3h 04za-3h 05za-3h 06za-3h 07za-3h 08za-3h 09za-3h 10za-3h 11za-3h 12za-3h 13za-3h 02za-8m 03za-8m 04za-8m 05za-8m 06za-8m 07za-8m 08za-8m 09za-8m 10za-8m 11za-8m 12za-8m 13za-8m
connector rohs compliance this product displays (lf)(sn) on a label. note: contact jst if awg #30 wire is to be used. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. 02za-3h - h?ray [standard color for awg#30] m?reen [standard color for awg#28]
|
